2015年计算机四级网工考试:路由器配置命令(2)
21、配置高速同步串行接口
Router (config) # interface s1/1
Router (config-if) # description To-shenzhen
Router (config-if) # bandwidth 2048
Router (config-if) # ip address 212.112.41.81 255.255.255.252
Router (config-if) # encapsulation hdlc
Router (config-if) # no ip directed-broadcast
Router (config-if) # no ip proxy-arp
22、配置POS接口
Router (config) # interface POS3/0
Router (config-if) # description To TianJingDaXue
Router (config-if) # bandwidth 2500,000
Router (config-if) # ip address 212.12.37.18 255.255.255.252
Router (config-if) # crc 32
Router (config-if) # pos framing sdh
Router (config-if) # no ip directed-broadcast
Router (config-if) # pos flag s1 s0 2
23、loopback 接口的配置
Router (config) # int loopback 0
Router (config-if) # ip address 192.167.167.6 255.255.255.255
Router (config-if) # no ip route-cache
Router (config-if) # no ip mroute-cache
24、配置静态路由
Router (config) # ip route 195.65.96.0 255.255.240.0 222.112.37.1(静态路由的配置)
25、进入RIP配置模式
Router (config) # router rip
26、设置参与RIP协议的网络地址
Router (config-router) # network 159.105.0.0
27、配置RIP的被动接口
Router (config-router) # passive-interface ethernet 0
28、配置RIP的路由过滤
Router (config) # access-list 12 deny any
Router (config) # router rip
Router (config-router) # distribute-list 12 in ethernet0
29、配置RIP的管理距离
Router (config-router) # distance 50
30、配置RIP的邻居路由器
Router (config-router) # neighbor 202.112.7.2
31、配置单个IP地址参与OSPF
Router (config) # router ospf 63
Router (config-router) # network 131.107.25.1 0.0.0.0 area 0
32、网络地址参与OSPF
Router (config-router) # network 133.181.0.0 0.0.255.255 area 0
33、定义参与OSPF的子网地址
Router (config-router) # area 0 range 212.37.123.0 255.255.255.0
34、配置被动接口(包括路由器和第三层交换机的配置)
Router (config-router) # passive-interface Ethernet 0
Router (config-router) # passive-interface vlan37
35、配置路由过滤
Router (config) # access-list 12 deny any
Router (config) # router ospf 63
Router (config-router) # distribute-list 12 in serial 0
36、配置管理距离
Router (config-router) # distance 10
37、配置OSPF引入外部路由的花费值
Router (config-router) # redistribute metric 100
38、配置引入外部路由时缺省的标记值
Router (config-router) # redistribute tag 10
39、配置引入外部路由时缺省的外部路由类型
Router (config-router) # redistribute connected metric-type 1 subnets
40、配置IP地址池的名称
Router (config) # ip dhcp pool ttt/234